Chlorine Dioxide Kit w. Colorimeter DC1200-CLO[LaMotte]
Click to enlarge image(s)
The Model 1200 Series of single test, direct reading colorimeters incorporates design advances that enhance reliability, improve accuracy, and simplify the calibration process, all in a portable, hand-held package and DPD with glycine to eliminate chlorine interference.
- Test Factor: Chlorine Dioxide
- Range (ppm): 0–7.0
- Detection Limit: 0.05
- Test Method (# of Reagents): DPD with Glycine Solution (2)
Field & Lab Use: An optional AC adapter (Order Code 1726) is available to save battery life when in the laboratory.
Large Display: The large 3 digit display presents measurements in absorbance, and indicates low battery warnings.
European CE Mark: The 1200 has been independently tested and has earned the European CE Mark of compliance for electromagnetic compatibility and safety.
EPA Compliant: Employing the proper wavelength and the DPD test method, the 1200 Chlorine Colorimeter Kit meets or exceeds EPA design specifications for NPDWR and NPDES chlorine monitoring programs (EPA 330.5).
0-4 ppm Chlorine: No need to select a low or high range. The 1200 covers the entire critical chlorine range of 0-4 ppm with a 0.05 sensitivity.
A Great Value: Complete, economical package! The 1200 Chlorine Colorimeter Kit comes with enough tablets for 100 tests or liquid reagents for 140 tests, six sample vials with screw caps, instruction manual, and sturdy carrying case. * Water Resistant Design: Designed with excessive exposure to moisture in mind, the 1200 colorimeters deliver trouble-free performance in the field and lab.
Improved Accuracy: The microprocessor enables the factory programmed calibrations to optimally match non-linear curves.
Auto-Zero: Simply insert the sample blank and press the zero key. No more dialing in the zero.
Hinged Light Cover: Flip-top lid over sample chamber prevents any stray light, especially in the field, and avoids misplacing separate light caps.
- Instrument Type: Single wavelength, direct-reading colorimeter
- Display: 3-1/2 digit LCD
- Photometric Precision: ±0.001 Absorbance Unit
- Detector: Silicon Photodiode
- Sample Chamber: Accept 25mm flat-bottomed glass vials with screw caps
- Light Source: LED
- Interface: RS-232 serial interface, 8 pin mDIN, 9600b, 8 data bits, 1 stop bit, no parity
- Power: Battery Operation: Alkaline 9-volt DC battery
100 *Chlorine DPD #1 Instrument Grade Tablets
15 mL Glycine Solution 6811-E1 Colorimeter Tubes, w/caps
1 Tablet Crusher
1 Water Sample Collecting Bottle
1 1200 Colorimeter for Chlorine Dioxide
Reagents marked with a * are considered to be potential health hazards.